point welding
英 [pɔɪnt ˈweldɪŋ]
美 [pɔɪnt ˈweldɪŋ]
点焊
双语例句
- This text introduces the technologic point of plasma arc welding for high temperature alloy, aluminium and aluminum alloy, titanium and titanium alloy, argentum, platinum, etc.
本文结合等离子弧焊接原理，具体介绍了高温合金、铝及铝合金、钛及钛合金、银与铂等金属材料等离子弧焊接的工艺要点及工艺参数。 - At this point I'm welding the lifting lugs onto the crucible.
在这一点上，我焊接坩埚解除耳。 - Possess the Functions of continuous welding, point welding and interval welding etc.
具备连续焊、点焊、间隙焊等功能。 - By analyzing the material and structure of the gas turbine combustion chamber with gas compressor cylinder proper, the key point of the assemble welding process has been worked out, and the special assembling tool set up has been designed as well.
通过对燃气轮机燃烧室兼压气机缸体的材料、结构进行分析研究，制订了装焊工艺要点，并设计了专用的装配工装。 - Single point and continuous points welding tests are performed by using different specifications and parameters respectively and some factors affecting welding quality are analyzed and some solutions are put forward.
分别采用不同的规范参数进行单点、连续点焊试验，对试验中影响焊接质量的因素加以分析，并提出解决方法。 - Calculation of the Distribution Rule of Strain Rate near the Stagnation Point during Explosive Welding
爆炸焊接驻点近区应变率分布规律计算 - Analysis of Strain Field Near Stagnation Point in Explosive Welding
爆炸焊驻点近区应变场分析 - This paper discusses the theory and characteristic of magneto compensated hall sensor. It also has a research and introduce of the sensor's application on UPS and electronic point welding machines.
对磁补偿式霍尔传感器的原理、特点进行了论述，研究介绍了它在UPS、电子点焊机方面的应用。 - The latest development of welding process simulation is analyzed in the paper. It is pointed out that increasing the efficiency and precision of simulation is the key point in modeling of welding process.
通过分析焊接过程仿真技术的发展现状，指出提高仿真方法的效率和精度是解决焊接过程仿真技术的若干关键问题。 - By researching the welding technology of BEPC ⅱ storage wreath vacuum box, the important point of the welding procedure is analyzed.
对BEPCⅡ储存环真空盒的焊接工艺进行了研究，分析了真空盒的焊接要点； - In this paper, welding process of titanium steel clad plate for internal cylinder and quality control point for welding of titanium steel clad plate were described, which were used in the third phase of construction of Zhenjiang Power Plant.
简要介绍了镇江电厂三期工程钢内筒钛钢复合板焊接工艺，及钛钢复合板焊接质量控制要点。 - This paper introduced the design of a TIG welding machine, which is used for six PTP ( point to point) assembling welding of the Hydraulic Torque Converter.
介绍了一种用于液力变矩器总成焊接的六点TIG焊专机控制系统。 - Motor Support Three point Automatic Resistance Welding Machine
摩托车轮圈支架三点自动焊机 - Preheating unit by using Xiapu gas is introduced, the key point that welding casing can be preheated without getting into furnace has been achieved.
介绍了利用霞普气制作的预热装置，实现了压缩机焊接机壳不需进炉就能预热的关键。 - The characteristics and difficult point exiting in auto welding jig design is introduced briefly. The design objective and Logical structure of 3-D jig CAD system are presented and system is developed on the computer platform.
简析了汽车焊接夹具设计的特点及现行设计手段的难点，由此提出了三维夹具CAD系统的设计目标和逻辑结构，并在微机平台上开发了此系统。 - A new starting point of friction stir welding: welding steel with FSW
搅拌摩擦焊技术的新起点&钢的焊接 - Finally dynamic pictures of welding temperature field and temperature distribution curve of each point in welding line are shown, as well as heat circulation in heat response areas and welding centre line is described by post-solution.
最后通过后处理，给出了焊接温度场的动态变化图，不同时刻焊缝处各点的温度分布曲线，并描述了焊缝中心线及其热响应区各点的热循环。 - The calculation of point welding robot's positional matrixes in wielding car-body-in-white is discussed in this paper, and the spatial motion trail of the robot is simulated with CATIA.
主要说明了点焊机器人在白车身焊接中位姿矩阵的计算，并用CATIA软件对机器人的运动轨迹进行仿真。 - The main innovate point of the welding robot is that it realizes the automatic tracking of unleaded automatic weld and multiplayer weld.
此种焊接机器人的主要创新点是，实现了无导轨自动焊接焊缝与多道焊的自动跟踪。 - The arc phenomenon in energy storage argon point welding, the process of transition of melting drop, the selection of main elements of welder as well as effect of technology specification parameters on the quality of spot welding are also analysed in detail in the article.
文中对储能氩弧点焊的电弧现象、熔滴过渡过程、焊机主要元件的选定、电路设计以及工艺规范参数对焊点质量的影响作了详细的分析。 - The Influence of Reinforcement Point Welding on the Fatigue Life of Concrete Bridge
论钢筋点焊联结对混凝土桥梁疲劳寿命的影响 - Based on the Miner's theory, this paper discusses the negative influence of reinforcement point welding on the fatigue life of concrete bridge.
从Miner线性损伤理论出发，论述了钢筋点焊联结将会缩短混凝土桥梁疲劳寿命的不良影响。 - Manufacturing technique of integrated panel point for welding thick plates
厚板焊接整体节点制造技术 - The fracture of the pump shaft is mainly caused by large size non metallic inclusions and point welding between the lock nut and the pump shaft.
结果表明，大尺寸的非金属夹杂和背帽外缘的点焊是引起泵轴过早断裂的主要原因。 - With this system the vertical and horizontal displacements of a point in the welding high temperature area are measured at the same time and get its locus during welding.
利用该系统同时测量出焊缝高温区一点的横、纵向位移，得到该点在焊接过程中的运动轨迹。 - The Melting and Point Welding of Aluminum Alloy Structure
铝合金结构的熔化及点焊 - Using different welding speed and the start point of welding to simulate the different peaks and distributions of residual stress for study the effect of welding residual stress of cross weld on the behaviors of tubular joints. 3.
通过不同的焊接速度和起焊点模拟焊接残余应力的峰值和分布的不同，研究焊接残余应力不同分布和峰值对节点承载力的影响。 - To ensure the best point of welding, a fourth axis R is to ensure torch to be adjusted in real time when welding.
为保证焊接最佳角度，用第四轴R轴保证焊枪构型姿态应随焊接实时调整。 - The researcher of Tianjin University has developed one kind of low transformation point welding rod, it can be applied on the position of high-carbon steel welding and eliminates welding residual stress effectively.
天津大学焊接实验室研制了一种新型低相变点焊条，应用在中高碳钢钢板的焊接中，能很好的消除残余应力。